No matter what you do with either setup, even on a perfect day you're probably only looking at 340 to 350 hp. Still, the kit does seem to solve the driveability problems seen on some SCPI stockers. In fact, GM does not even service the injectors separately. However, these injectors are still not a standard direct-port fuel injector configuration, so they cannot be upgraded with higher-capacity units. The kit moves the injectors out of the original fuel meter, relocating them downstream in place of the troublesome poppet valves. Also required is a seal kit, upper-to-lower intake (PN 17113206), and a new fuel meter body bracket (PN 93442096). According to Burt Chevrolet, GM finally issued a service MFI (multiport flexible injection) kit (PN 93441235) that includes a new fuel meter body, a regulator, eight drivers, eight Multec-2-style injectors, electrical connectors, and lines to connect the drivers in the fuel meter body to the injectors. Initially, GM recommended an injector-cleaning process, but it was only a temporary fix-eventually the problem would recur. The problem was usually most apparent under cold start-up conditions after sitting overnight. Deposit buildup on the valve's ball and seat would cause the valve to stick open or closed, resulting in a misfueled cylinder and consequent misfire. The original SCPI poppet valves proved problematic.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |